How industrial robots are repaired

How to repair industrial robots - might problems occur?

With the popularity of industrial robots  robotic arms , enterprises use industrial robot arms in large quantities , with it comes an increasing number of industrial robot enterprises companies. The industrial robot industry is also engaged in a price war. With the arrival of the industrial robot price war, more low-cost cheap industrial robots are added to factory production lines. However, due to different costs configurations, industrial robots are also uneven, which gives many corporate users a headache because of failures various problems. Of course, there are also companies in the industrial robot industry that focus on quality reasonable prices. For example, Huiwen Intelligent's robots use highly stable configurations are relatively competitive in price.

Below, the editor will explain the problems of industrial robot maintenance failure in some companies, industrial robot manipulator problems may occur! (When companies purchase industrial robots, they must choose the right robot manipulator company, rigorous application solutions, reasonable industrial robot configuration price)

1. Industrial robot maintenance failure - operational error. Among the industrial robot maintenance failures, many alarms occur because the company employees are familiar with the operation. In this regard, as long as the industrial robot manufacturer is more responsible, it can be handled.

2. Oil leakage of industrial robots - This is a problem that may be caused by some industrial robot companies doing a good job of sealing the internal reducer castings. This requires first checking the problem to confirm the problem disassembling the reducer to do a good job of sealing.

3. Industrial robot alarm failure - This is a very common problem. Whether it is an operational error, loose circuit other problems that cause the robot system alarm, it will be reflected in the system driver, there will be a corresponding alarm code. The problem will be checked according to the alarm code finally resolved.

4. Industrial robot low configuration failure - The industrial robot failure of some companies is due to the use of poor accessories, so various alarms will occur, instability. The editor has a friend who bought a very cheap industrial robot had a shaft failure. This type of robot is basically suitable for repair can only be replaced with a robot of other brands.

Combined with the above, as long as the industrial robot is configured reasonably according to the needs, with a reasonable plan, rigorous discussion, purchased at the right price, it is basically easy to malfunction.